Click to view |
Title / Description |
Item # |
Price |
FRAME OVERVIEW This shows 2 pairs connected to form the frame - note that each of the sides also has the center marked |
see below |
see below |
|
CORNER VIEW The "T"-Tool fits the small hex screw fitted to the corners |
see below |
see below |
|
"T"-TOOL The "T"-Tool fitted into the hex screw in the corner |
ESB-T |
||
|
Evertite Slimline Stretcher Bar Pair - 6" |
ESB-6 |
|
|
Evertite Slimline Stretcher Bar Pair - 7" |
ESB-7 |
|
|
Evertite Slimline Stretcher Bar Pair - 8" |
ESB-8 |
|
|
Evertite Slimline Stretcher Bar Pair - 9" |
ESB-9 |
|
|
Evertite Slimline Stretcher Bar Pair - 10" |
ESB-10 |
|
|
Evertite Slimline Stretcher Bar Pair - 11" |
ESB-11 |
|
|
Evertite Slimline Stretcher Bar Pair - 12" |
ESB-12 |
|
|
Evertite Slimline Stretcher Bar Pair - 13" |
ESB-13 |
|
|
Evertite Slimline Stretcher Bar Pair - 14" |
ESB-14 |
|
|
Evertite Slimline Stretcher Bar Pair - 15" |
ESB-15 |
|
|
Evertite Slimline Stretcher Bar Pair - 16" |
ESB-16 |
|
|
Evertite Slimline Stretcher Bar Pair - 17" |
ESB-17 |
|
|
Evertite Slimline Stretcher Bar Pair - 18" |
ESB-18 |
|
|
Evertite Slimline Stretcher Bar Pair - 19" |
ESB-19 |
|
|
Evertite Slimline Stretcher Bar Pair - 20" |
ESB-20 |
|
|
Evertite Slimline Stretcher Bar Pair - 21" |
ESB-21 |
|
|
Evertite Slimline Stretcher Bar Pair - 22" |
ESB-22 |
|
|
Evertite Slimline Stretcher Bar Pair - 23" |
ESB-23 |
|
|
Evertite Slimline Stretcher Bar Pair - 24" |
ESB-24 |
|
|
Evertite Slimline Stretcher Bar Pair - 25" |
ESB-25 |
|
|
Evertite Slimline Stretcher Bar Pair - 26" |
ESB-26 |
|
|
Evertite Slimline Stretcher Bar Pair - 27" |
ESB-27 |
|
|
Evertite Slimline Stretcher Bar Pair - 28" |
ESB-28 |
|
|
Evertite Slimline Stretcher Bar Pair - 29" |
ESB-29 |
|
|
Evertite Slimline Stretcher Bar Pair - 30" |
ESB-30 |
|
|
Evertite Slimline Stretcher Bar Pair - 31" |
ESB-31 |
|
|
Evertite Slimline Stretcher Bar Pair - 32" |
ESB-32 |
|
|
Evertite Slimline Stretcher Bar Pair - 33" |
ESB-33 |
|
|
|||
|
Evertite XX Stretcher Bar for sizes greater than 33 " (up to 55") A matching set of XX bars is needed to form a frame (so you will need to order a second pair of XX bars). For example, if your canvas is 34" x 16" you will need ESBXX-34 and ESBXX-16 |
ESBXX-size |
priced when ordered |
CORJAC TACK KIT Great little tack kit with extra sharp tacks, magnetic tack pusher, and tack extractor |
|
||
PRIMA #6 TACKS Nickel-plated steel tacks - 5/8" and slightly domed - great for Evertite stretchers bars - not suitable for mini-stretcher bars |
|
||
CLOVER TACKS Approx 50 tacks - includes a tack remover |
|
||
GRANDE TACKS Approx 50 extra-large tacks - great for Evertite stretchers bars - not suitable for mini-stretcher bars |
|
MORE INFORMATION ABOUT EVERTITES Evertites are designed to give a taut working surface. It accomplishes
this when the bolts that you see positioned on the outer surface of the bar
push on the bar in front of it. After attaching a canvas as you normally would there always seems to be a little slack in the canvas. Just turn the
bolts to apply pressure and the bars are pushed apart to make the surface
taut. As you work on a project it seems to loosen up some, so again just
turn the bolts to keep the surface firm. If it is necessary to set a
project aside for a while you can retract the bolts to relax the surface and
then re-tighten later. You can also slacken the canvas enough to do bullion knots. |
Radish Roots LLC
Radish Roots LLC
Palm Coast Fl. 32137
PH. 386-264-5046 Email hello@radishrootsnpt.com
© 1996-2017 Stitchers' Paradise. All Rights Reserved.